Does the E7000 Series system need a dedicated router?

A dedicated router, one or more Layer-2 switches, or both will be required if the E7000 Series system is installed on its own private network. However, even when intending to install the E7000 Series on the customer’s network, a ”temporary” router is also handy during...

Whitelisted URLs Required for Debian and the E7000 Series

The E7000 Series requires access to specific Uniform Resource Locators (URLs), commonly referred to as web addresses. Access to many of these web addresses is required during installation; access to other web addresses, such as the address for the Network Time Server...

What kind of PoE switch does the E7000 Series need?

The Nyquist-based VoIP speakers and I/O Controllers are Class-3 PoE 802.3af devices. Make sure that the switch these devices are connected to can provide sufficient power for the total number of PoE devices you are planning to connect to...

Required Network Ports

The E7000 Series server and the associated devices require specific network ports. The following table describes these required network ports. Service Description Port DHCP Dynamic Host Configuration Protocol (Optional) 67, 68 DNS Domain Name System (Optional) 53...

E7000 Series Server Requirements

The following are the minimum E7000 Series Server requirements: OS Debian Linux OS (AMD 64-bit version) release 8.9.0. Refer to the most up to date release notes on the http://www.bogenedu.com web site for details about which Linux OS versions have been tested for use...

Leave Your Knowledge Base Question

You will get a notification email when Knowledgebase answerd/updated!

+ = Verify Human or Spambot ?