Configuring Media Assignments with Quantum Commander

Quantum Commander lets an administrator configure media assignments and television schedules for all stations defined as Telemedia Controller. Station type is defined during QSPC1 station configuration. You must configure media assignment for each QSPC1 within a...

Configuring External Relays

Quantum allows the configuration of up to four external relays.  To define one or more  external relays: Select Admin from the Quantum Commander screen. Select External Relays. If the Relay number is highlighted in red, the relay is off. A Relay number in green...

Configuring Input Relay Closures in Quantum

Quantum lets you configure up to six input relay closures for a facility. Input relay closures activate externally triggered time tones associated with time zones one through six. Input relays can also trigger an emergency message to play in the Time Zone when the...

Defining Station Settings

Quantum’s Station screen enables you to create, review or modify up to 265 stations depending on unit type for each QSPC1 within a facility. The numbered stations represent the associated station ports on the Quantum system. To access the Station Configuration...

Configuring the QSPC1 Quantum System Processor Card

With Quantum, each facility can have multiple QSPC1 Quantum System Processor Cards. For each QSPC1, Quantum lets you store the information required to program and run the system. The first QSPC1 in the facility should be the primary QSPC1 and must be configured with a...

Leave Your Knowledge Base Question

You will get a notification email when Knowledgebase answerd/updated!

+ = Verify Human or Spambot ?